PF940CV1, Polymer80 PF940V2, and PF9SS 80 Percent Frame and Jig Kit Bundle (Black Only)

Overview

If you are looking to build a compact, full-size, or subcompact handgun from the frame up, this bundle brings together three of the most popular 80 percent frame platforms from Polymer80. The pf940cv1, polymer80 pf940v2, and pf9ss 80 percent frame and jig kit bundle (black only) gives you the foundation for three distinct builds, all in a single package. Each frame is manufactured from high-strength, impact-resistant polymer and comes with the necessary jig and drill bits to complete the machining process. This bundle is for individuals who want to finish their own frames at home, using basic tools and a bit of patience.

Features and Specs

Each frame in this bundle is designed to accept standard Glock-compatible parts, so you can customize your build with aftermarket slides, barrels, trigger groups, and more. The pf940cv1 is a compact frame that fits a G19 slide and barrel, while the polymer80 pf940v2 is a full-size frame for a G17. The pf9ss is a single-stack subcompact frame for a G43. All frames are black and include the corresponding jig kit for precise drilling.

• PF940CV1 (Compact): G19 Gen3-compatible frame, 3.5-inch barrel length, includes jig, drill bits, and end mill
• Polymer80 PF940V2 (Full-Size): G17 Gen3-compatible frame, 4.5-inch barrel length, includes jig, drill bits, and end mill
• PF9SS (Single-Stack Subcompact): G43-compatible frame, 3.4-inch barrel length, includes jig, drill bits, and end mill
• All frames feature an integrated locking block, steel rear rail system, and textured grip panels
• Complete jig kits include pre-drilled alignment holes and hardened steel drill bits for accurate pin placement

Each frame is machined from the same high-quality polymer used in commercial duty firearms, and the jig system is designed to guide you through the three critical pin holes. The pf940cv1, polymer80 pf940v2, and pf9ss 80 percent frame and jig kit bundle (black only) is a comprehensive set that saves you from sourcing each frame separately.

Who It Is For

This bundle is ideal for the home builder who wants to complete multiple projects. If you are experienced with finishing 80 percent frames, these three platforms allow you to build a full-size, compact, and subcompact all at once. It is also a smart choice for someone who wants to test different frame sizes before deciding on a dedicated carry or competition build. The pf940cv1 and polymer80 pf940v2 share the same Gen3 parts compatibility, while the pf9ss lets you explore the single-stack platform. Whether you are a first-time builder or a seasoned hobbyist, the included jig kits make the process straightforward and repeatable.

• Builders who want a complete set of three frame sizes in one order
• Shooters who want to try the compact, full-size, and subcompact platforms
• Anyone looking for a hands-on project with clear instructions and minimal tooling

Remember that each frame requires you to remove the trigger housing pocket and drill the pin holes. The jig guides the drill bit to the exact depth and angle, so you can achieve consistent results across all three frames. The pf940cv1, polymer80 pf940v2, and pf9ss 80 percent frame and jig kit bundle (black only) is a practical way to expand your collection of 80 percent builds.

Shipping and FFL

This product is a firearm frame that is not yet a finished receiver. Under current ATF regulations, 80 percent frames do not require a serial number and can be shipped directly to your home address. No FFL transfer is needed for this item. However, once you complete the frame, it becomes a firearm, and you must comply with all federal, state, and local laws regarding possession and use. Please verify your local laws before ordering. We ship this bundle in a discreet package via UPS Ground or FedEx, with adult signature required. Standard shipping times apply.

• Shipped direct to your door with no FFL transfer required
• Adult signature required upon delivery
• Check your state and local laws before purchase